Locost: Desperate Trackday Preperation

Life has got the better of me over the last few months and progress on the Locost has been slow. I had hoped to be doing a Trackday this December, but the car simply wasn’t ready, and there weren’t enough hours in the day to make it so. Subsequently, when my mate Dan messaged me about a Trackday he was organizing at Snetterton in February I was all ears. This is just far enough away to give me enough time to get the car prepared, but at a push. Fortunately, I work well under pressure.

So for my benefit, here is my Locost-work-list that needs to be completed before February the 13th:

  • Fibreglass Rear Arches – By now you have read my article about the Locosts rear light pods.
Read More

Fabrication: From CAD, to 3D Print, to Fibreglass

To trackday a car it needs a reasonable level of illumination, to communicate your intensions and make yourself more visible in low light conditions. Indicating left, pass me on the right. Hazards flashing, I’ve had a bad day. This is something the Locost has not needed until now, as it has only ever been driven on closed courses with only one car competing at a time.

I already own a set of rear light clusters that I bought almost six years ago when I was initially stockpiling parts. I decided to go with these “hamburger” style rear lights as they mirror the round headlights at the front of the car, that I am also yet to install, and also I could get them with clear LED’s which would keep the car aesthetically pleasing.… Read More

Locost: Baffled and Gated Sump

This is the first part in a series I like to call “What’s wrong with the Locost?” or WWWTL for short. I promised myself I would do a Trackday this year and as things are starting to slow down for the summer I now have time to prepare the car.

Firstly, the Locost is not perfect; I can easily stand and point my finger at a million things “wrong” with it and there are a few things I can’t really live with that I feel I need to amend before it starts turning laps.

You see, as you fix the fundamental setup issues on your home built race car, and attach a set of half decent sticky tyres, you’ll start to go around corners much faster.… Read More

Fabrication: That time I made an Exhaust Manifold

I’m going to try to document a few of my older projects that fell through the cracks and didn’t make it on to here. Hopefully you’ll find these little articles both interesting and informative… and there are pictures!

A couple of years ago I made an exhaust manifold for a friends Seven. Having seen the stainless manifold on my Locost he wanted one in the same “over the chassis” style. The manifold on my Seven was/is OK, it does the job, but its not my best piece of work; I was learning along the way. The Locost itself is a testament to my abilities at each stage of its build; some parts are better than others due to improving my fabrication skills as I went along.… Read More

3D Printer: Upgrades 2/3

It’s taken me almost two months to get around to writing part 2 of this series, opps! However this is because I have actually been using the printer, and working on a project for a friends rally car (watch this space).

Now where were we… ah yes, the heated bed. In the previous article I explained why a heated bed is a good upgrade for a 3D Printer, especially one that uses high temperature plastics such as ABS. Installing one is easy straightforward, however my little machine required a few modifications along the way.

To convert your printer to use a heated bed first you’re going to need, you guessed it, a heater to heat the bed.… Read More